How to Remove Speed Limiter on Electric Scooter

How to Remove Speed Limiter on Electric Scooter?

The electric scooter is an eco-friendly and convenient mode of commuting. But most riders have issues with its low top speed, which may be frustrating in some situations. Are you the one facing the same problem and looking for ways “how to remove speed limiter on electric scooter?” or do you want to know “how to increase the speed of an electric scooter?” Well, it isn’t difficult, and most people do this to double their driving fun. Here we’ll discuss a detailed solution with different scenarios for your ease. If You’re a new rider and don’t know how to ride an electric scooter, please don’t do this.

Before we dive in, it’s essential to understand that the speed limiter is there for a good reason, and removing it in some states is illegal and unsafe. Before modifying your scooter, you must consult local laws regarding this matter. Fortunately, if your state or country laws permit you to do so, let’s get started!

What is an Electronic Speed Limiter?

An electronic speed limiter is a safety device installed in the software of an electronic scooter that limits its maximum speed to a predefined threshold set by the manufacturer. It’s not just a mechanical limitation that can be removed as easily as it seems to be. It’s embedded in the controller unit, the main functional part of the e-scooter, and to detach it, you need to follow certain procedures. Also, read about Top speed lime Scooter.

Benefits of Removing Speed Limiter On Electric Scooters

There’re myriads of advantages that you’ll entertain just after removing the speed limiter. A few are discussed below:

Better Performance: Removing the speed limiter from your scooter will ensure better performance and high speeds if you drive on private land and off-road.

Participate in Competitive Events: If you want to participate in competitive events, i.e., riding competition, then to move faster and win the match requires you to remove the speed limiter.

Engine Life and Electricity Saving: When you’ve removed the electric speed limiter from your scooter, it can now cover long distances with a single charge, thus saving electricity. At the same time, many people claim that by removing the speed limiter, their scooter’s engine life has increased by 20%.

Save Money and Time: Within the limits of the local laws, removing the speed limiter helps save time in moving from one place to the other, as the scooter speed has increased. At the same time, it saves money that you pay in the form of electricity bills.

Meeting Up Emergency: When you’re in a hurry, or you’ve to meet an emergency, you can make your go as faster as you can, only when there’s no speed limiter.

Also, read about the Best Electric scooters under $300.

Also, read about the Best kick scooter for commuting.

How to Remove Speed Limiter on Electric Scooter | Easy Steps

Even so, the step-by-step instructions we’re going to mention here will vary too greatly from brand to brand and model to model. Always be conscious of digging out your user manual before making any changes. However, the most common steps are outlined below: 

Step#1: Remove the two crosshead screws from the deck’s bottom and front. With the help of a screwdriver, loosen the locknut from the carburetor’s throttle side so you can disengage the wire.

Step#2: Unscrew the two crosshead screws at the top until they free from the casing, exposing the metal ring inside their place of attachment.

Step#3: Next, open the casing toward the front wheel. You’ll see a bunch of wires; out of these, the 4 will be the same color. Suppose these are white. Detach and cut the 4 white wires from the base with the help of a screwdriver.

Step#4: Tape, the 4 wires at the open ends to keep them tidy. Then slide the casing back into its place.

Step#5: End by pulling the 4 crosshead screws back. Hurrah! You’ve done.

It’s how to remove speed limiter on electric scooter to increase its speed. There are also a few other ways that you can adopt to boost the scooter’s speed.

Also, read about the Best Adult Kick scooters according to 2023 research.

YouTube video

Other Methods to Increase the Speed of an Electric Scooter 

Method 1: Disable the Speed Limiter

It’s also possible to disable the speed limiter instead of removing it if you want to increase the speed of your e-scooter. Follow the below step-by-step guidelines to disable the one.

  • Turn the display off.
  • Press and hold the e-scooter brake. Keep pressing it.
  • Turn the display on. It’ll show the current speed limit level (For Example, L1, L2, L3, L4, or L5).
  • Press the LIGHT button to increase or decrease the speed level until you reach the desired option.
  • When you’ve reached your desired speed level, Press the “S” button; here, “S” is finally used to set the speed limit.
  • That’s all. You’ve now changed the speed limitations and disabled the preset speed parameters. Now you can get your hands off the brake and turn on the scooter.

Method 2: Flash the Main Controller Software

It’s a bit complex method and can result in the voiding of the e-scooter warranty, as in this case, you’ve to rewrite the whole framework software of the scooter. It’s useful for Xiaomi Mi M365 electric scooters, where there’s no display. Only a mobile application is available to control the functionality of the controller. If you want to modify the speed limitations, you must rewrite the controller software. If the process goes smoothly, the speed can reach 30-31Km/h, which’s quite impressive. 

However, if it goes wrong, your scooter will become useless (it can’t be used later). So make sure to research your scooter’s model properly, as these changes are irreversible and not recommended if you’re not an expert. Additionally, framework modification isn’t possible for every e-scooter, especially for the models from before 2017.

Once you’ve decided, check if these custom updates are available for your model. If yes, proceed by downloading the custom update to your mobile and interface with your e-scooter through its built-in mobile app. Most e-scooters have specific mobile applications that allow manufacturers approved settings to be changed; this is how firmware upgrades are accessed.

Method 3: Upgrade the Battery

Battery upgrade is another common option to modify the speed of an e-scooter. But remember that running your e-scooter on a battery other than its manufacturer recommended can permanently damage the scooter and void its warranty. Apart from these issues, the battery of the scooter plays a crucial role in determining its potential top speed, with voltages ranging from 24-48 Volts depending on the model. But, most of the models use 24 volts Li-ion battery.

You need to do proper research to know whether your scooter can fit in with a different, larger battery pack. Never install a 48-volts battery into a 24-volt battery pack to accomplish higher speeds, as this can be damaging. Also, make a mental note that you’ll still need to remove the speed comptroller to compensate for the additional horsepower the new battery provides.

How to Remove Speed Limiter on Electric Scooter Xiaomi 1S?

If you ‘ve a Xiaomi 1S e-scooter, then you can follow the below steps to remove the speed limiter:

  • Go to the Google Play Store and install the m365 DownG APP.
  • Next, Download the Xiaomi m365 max speed firmware mod software.
  • Connect your scooter to the m365 DownG APP.
  • Open BIN, check the version, and tap on “Flash.”
  • That’s all; you’ve now removed the speed limiter. If that doesn’t work, maybe you’ve got the newest Xiaomi scooter model or have recently updated the Xiaomi Home APP, so try to search for any other custom firmware.
  • Fantastic! You can now drive your scooter much faster than the original speed.

How to Remove Speed Limiter on Electric Scooter Xiaomi Pro 2?

You must follow the same procedure as Xiaomi 1S to remove the speed limiter on the electric scooter Xiaomi Pro 2. Try to make your custom firmware for Xiaomi Pro 2 by pressing the maximum power button and setting the maximum speed to 45km/h, or search for custom firmware, because modified versions are required on different models.

Also, read about The Best Electric scooters under $1000.

FAQs

1- What is the typical top speed of electric scooters for adults?

The majority of the e-scooters have been designed with a speed limit of 20mph, though some speed limit controllers allow a top speed of up to 30mph.

2- What is the simplest way to increase the speed of an electric scooter?

Upgrading the battery to a higher voltage is the simplest way to increase the motor’s power. The more powerful the engine, the faster it will go.

3- How do I remove the limit on the speed of my 50cc scooter?

Disconnect the throttle and spark plug wires and follow the abovementioned procedures to remove the speed limit on a 50cc scooter.

4- Where to Find the Speed Limiter on an Electric Scooter?

You can find the speed limiter elements on the main component, called the controller, of the e-scooter.

5-how to remove speed limiter on okai scooter?

The process of Okai speed limiter is the same as other electric scooters.

Conclusion

We hope your query- “how to remove speed limiter on electric scooter,” has been resolved. The speed limit is not bad; manufacturers have imposed it for a good reason: safety concerns and laws. But if you need to get rid of the speed limiters, then you can choose one of the provided solutions that suits your needs.

Obey Laws, and Stay Safe!

Also, Read our Guide on Choosing the best Stunt Scooters.

Similar Posts